Fine abrasive polish Gelcoat Fine Cut GF6.01 Koch Chemie 2 X 1 liter

The paint should really shine again? Then simply use the Fine abrasive polish Gelcoat Fine Cut GF6.01 Koch Chemie 2 X 1 liter.

Machine polish for restoring moderately weathered gelcoats and boat paints. Page 1 of 1 For the quick and complete removal of moderate scratches, e.g., dullness caused by fenders, as well as oxidation, chalking, and dull spots. Gelcoat Fine Cut can be polished for a long time and creates a lasting deep shine, even on dark gelcoats and paint colors. Easy, efficient application and simple polishing. The ideal preparation for subsequent high-gloss polishing. Silicone oil-free.

Technical data and description:

• Medium weathered gelcoats and boat varnishes
• Manufacturer No.: 499001.
• Manufacturer: Koch Chemie.
• Delivery quantity: 2 liter.
• Delivery content: 2 piece á 1 liter is supplied as shown in the product image.

Recommendation for use:
Can be applied using both rotary and orbital polishers. Apply 5 pea-sized drops to a suitable polishing pad (fine cut pad) and work in a crisscross motion.
Distribute the product over the surface at low speed and then apply it using a rotary polisher at approximately 1,000 rpm (for orbital polishing, use the highest setting). Buff out the polish and remove any remaining polish residue using a Polish & Sealing Towel. We recommend sealing after polishing with Gelcoat Finish, Marine Protective Sealant, or Ceramic Boat Hull to close the surface pores and prevent rapid chalking or soiling.
.

All information is published to the best of our knowledge. However, we reserve the right to make changes.

Product safety

Hazard