Tank sealing Wagner one-component resin 2 X 175 ml

Your tank is rusted inside and needs to be saved? We have the solution: Tank Sealer Wagner one-component resin 2 X 175 ml.

Transparent and ready-to-use one-component resin for sealing and restoring tanks - prevents renewed rust formation on the inner tank surfaces and thus protects the tank from corrosion in the long term.

Tank in tank
WAGNER Tankfix - saves any tank by installing a protective inner tank. Even fuel tanks that already smell, weep or drip are usually 100% leak-proof again after sealing!

Gasoline and acid-resistant long-term coating
WAGNER Tankfix is resistant to leaded as well as unleaded fuel, ethanol-gasoline mixtures such as E5, E10 and E85, pure ethanol, pure gasoline, two-stroke mixture, diesel fuel, aviation gasoline, engine oil, transmission oil, hydraulic oil, mineral oil, synthetic oil, two-stroke oil, top oil, cooling water and additives such as WAGNER Bactofin gasoline stabilizer.

Simple application due to one-component formula
Unlike most two-component sealants, our transparent one-component resin does not become brittle and retains a minimum degree of flexibility permanently. Thus WAGNER Tankfix remains elastic and flexible after drying and can reliably compensate for the expansion and contraction of a metal tank caused by natural temperature fluctuations. Unlike often very rigid 2k coatings, this means that there are NO "micro-cracks" that can be infiltrated by fuel and therefore our tank sealant CANNOT peel off and will withstand any damage to the tank caused by vibration or minor accidents.
The water-like consistency and long working time of the transparent WAGNER tank sealing resin allow it to work thoroughly and reliably. This gives you the security of coating, sealing and preserving the tank completely and without "gaps" with our Tankfix.

Technical data and description One-component resin for tank sealing:

• Tank within a tank: WAGNER one-component tank sealing resin saves every tank by adding a protective inner tank. Even fuel tanks that are already smelling, oozing or dripping are usually 100% leak-proof again after sealing!
• WAGNER One-Component Tank Sealer Resin is resistant to leaded as well as unleaded fuel, ethanol-gasoline mixtures such as E5, E10 and E85, pure ethanol, pure gasoline, two-stroke mixture, diesel fuel, aviation gasoline, engine oil, transmission oil, hydraulic oil, mineral oil, synthetic oil, two-stroke oil, top oil, cooling water and additives such as WAGNER Bactofin Gasoline Stabilizer.
• Application & Dosage:
• After appropriate preparatory work, pour the necessary quantity of transparent WAGNER one-component resin into the tank, depending on the tank size, and shake it vigorously, then swirl it out carefully. The resin should completely wet all inner walls. After the first coat has dried and is no longer tacky (after approx. 12 - 24 hours), a second coat can be applied. After about 7 to 8 days the coating is fully cured.
• 100% ethanol resistant.
• Permanently flexible.
• Cures slowly.
• Adheres perfectly.
• Forms a long-term coating resistant to gasoline and acids.
• Seals small leaks (seams, welds, small holes).
• Solvent-based one-component polyurethane resin, thus universal application.
• Multiple applications, as excess resin can be reused.
• Made in Germany !!!!!!!!!!.
• Manufacturer number: 072175.
• Manufacturer: Wagner Special Lubricants.
• Consumption: 175 ml is sufficient for the internal tank treatment of up to 10 liters tank capacity.
• Delivery quantity: 350 ml.
• Delivery content: 2 pieces á 175 ml is supplied as shown in the product image.

All information is published to the best of our knowledge. Nevertheless, we reserve the right to make changes.

Product safety

Hazard