Presto 2K aluminum filler metal putty 3 X 250 g

Do you have a bump? Then we have a solution for you! The Presto 2K Alu Metall Filler 600351 3 X 250 g, dents are filled and evened out. The leveling compounds from the traditional German manufacturer Presto are premium products made in Germany.

The presto products form a perfect repair system and offer the customer a highly competent range. But not only on the vehicle, also around the house and garden, there are countless possible applications for repairs and value retention. Prestolith® aluminum metal filler 600351 including the hardener. Aluminum-containing soft filler for every metallic surface; Easy to pull out over a large area thanks to the included aluminum particles.
Two-component polyester metal filler, as a mixture of a medium-elastic, highly reactive, amine-pre-accelerated polyester resin with various environmentally friendly fillers and aluminum pigments (asbestos and silicone-free), highly thixotropic, therefore particularly easy to apply over a large area and pore-free.

Technical data and description Presto 2K Alu Metallspachtel 250 g 600351:

• Easy processing.
• Easy to sand off.
• Very good adhesion.
• Asbestos and silicone free.
• Short curing time.
• Resistant to weak acids and weak bases; Propellants, solvents, water and de-icing salts.
• Country of manufacture: Germany.
• Manufacturer: Presto.
• Manufacturer number: 600351.
• Delivery quantity: 750 g
• Delivery content: 3 piece á 250 g delivered as shown on the product picture.

Properties:

• Can be sanded off after: approx. 20 - 30 minutes.
• Pot life at 20 ° C: approx. 4 - 5 minutes.
• Flash point: approx. 32 ° C.
• Density at 20 ° C: 1.65 kg / dm³.
• Addition of hardener: 2.5%.
• Temperature resistance of the hardened material: up to 120 ° C.
• Resistant to: acids, alkalis, propellants, solvents, water and de-icing salts.
• Color gray.
• High elasticity, good adhesion, easy sanding, even after a long period of time. Suitable for stove enamelling.

Instructions for use:

Always read and observe the warning texts carefully before use!

application:

1. The surface to be filled should be derusted, clean, dry, free of grease and sanded.
2. Take the required amount of material from the package and mix well with the appropriate amount of hardener.
3. Apply the mixed material in the desired layer thickness.
4. Clean tools immediately after use, possibly wash them off with nitro thinner.
5. Do not return mixed material to the can.
6. After approx. 20-30 minutes, the filled surface can be drilled, sanded, sawed, filed and painted.

Physical and chemical data:

• Basis: polyester resin with mineral fillers and aluminum pigments.
• Color: gray.
• Smell: of styrene.
• Form: pasty, soft, thixotropic.
• Pot life / processing time at 20 ° C: approx. 4 - 5 min. (Styrene-reduced quality: approx. 5-6 min.).
• Processing temperature: from 12 ° C.
• Drying (at 20 ° C, 50% relative humidity):
• Can be sanded after: approx. 20 - 30 minutes (styrene-reduced quality: after approx. 30 minutes).
• Flash point:
• approx. 33 ° C (spatula); not applicable for hardeners.
• Density at 20 ° C:
• Filler 1.75 g / cm³.
• Hardener 1.15 g / cm³.
• Addition of hardener: 2 - 4% (optimal mixture 2.5%).
• Temperature resistance of the hardened material: 120 ° C.
• Shelf life / storage:
• 24 months (styrene-reduced quality: 18 months) with appropriate storage (= 10 ° -25 ° C, relative humidity of max. 60%) in the closed original container. Protect from direct sunlight, frost and moisture.
• Container:
• Filling compounds: narrow ring boxes.
• Hardener: plastic tubes.

Environment and labeling:

Environmentally friendly: MOTIP DUPLI products are free from harmful metals. The group of companies strives to use recipes without regulated or questionable ingredients without influencing the best possible performance. The tops and packing are made out of recycled material.

Disposal: Please only recycle completely empty containers. Dispose of drums and remnants at hazardous or special waste collection points.

Labeling: All MOTIP DUPLI products comply with the current status of labeling regulations. The classification, classification, labeling is carried out according to GHS or CLP 1272/2008 / EG in the currently valid form. The safety data sheets correspond to REACH 1907/2006 / EG, Article 31 and Annex II, in the currently valid form.

Product safety

Hazard