Presto 2K fiberglass spatula 250 g gray-green

Do you need to repair larger areas of damage? Then simply use: Presto 60103 2K glass fiber filler 250 g gray-green, for repairing rust-through. The putties from the traditional German manufacturer Presto are premium products, made in Germany.

The presto products form the perfect repair system and offer the customer a highly competent range. But not only on the vehicle, also around the house and garden are countless applications for repair and value retention.
Prestolith® Glass Fiber Filler 601013 including hardener. For repairing larger areas of damage that have already rusted through and are exposed to particular mechanical stress. Can be used on metal, wood, concrete, many plastics, etc. Perforations can be bridged and stabilized, larger unevennesses can be filled. The newly developed adhesion promoter NT ensures particularly good adhesion, the elastic resin used allows use even on surfaces subject to stress and expansion forces.

Technical data and description:

• The newly developed adhesion promoter NT grants a particularly good adhesion.
• The elastic resin used allows it to be used even on surfaces subject to stress and expansion forces.
• Easy processing.
• Easy to sand.
• Very good adhesion.
• Free of asbestos and silicone.
• Short curing time.
• Resistant to weak acids, weak alkalis; blowing agents, solvents, water and de-icing salts.
• Manufacturer- No.: 601013.
• Manufacturer: Presto.
• Delivery quantity: 250 g.
• Delivery content: 1 piece á 250 g as shown in the product picture delivered.

Directions for use:

Always carefully read and observe the caution texts before use!

Application

1. The surface to be filled should be derusted, clean, dry, free of grease and sanded.
2. As primer before and after filling we recommend presto Epoxy Primer (please observe drying time).
3. Take the required quantity of material from the package and mix well with the corresponding quantity of hardener.
4. Apply the mixed material in the desired layer thickness.
5. Clean tools immediately after use, wash off with nitro thinner if necessary.
6. Do not return mixed material to the can.
7. After approx. 20-30 minutes, the filled surface can be drilled, sanded, sawed, filed and painted.

Physical and Chemical Data:

• Base: polyester resin with mineral fillers and glass fiber parts.
• Color: gray-green.
• Odor: of styrene.
• Form: pasty, soft, thixotropic.
• Pot life/processing time at 20°C: approx. 5 - 6 min.
• Working temperature: from 12°C.
• Drying (at 20°C, 50% relative humidity):
• Sandable after: approx. 30 min.
• Flash point:
• approx. 33°C (putty); not applicable for hardener.
• Density at 20°C:
• Filler 1.46 g/cm³.
• Hardener 1.15 g/cm³.
• Addition of hardener: 2 - 4 % (optimum mixture 2.5 %).
• Temperature resistance of the cured material: 120°C.
• Shelf life/storage:
• 18 months when stored properly (=10°-25°C, relative humidity of max. 60%) in closed original container. Protect from direct sunlight, frost and moisture.
• Packaging:
• Filling compounds: narrow ring tins.
• Hardener: Plastic tubes.

Environment and labeling:

Environmentally sound: The products of MOTIP DUPLI are free of harmful metals. The corporate group strives to use formulations without regulated or questionable ingredients without influencing the best possible performance. The tops and packing are made out of recycled material.

Disposal: Please only recycle completely emptied containers for recycling. Dispose of drums and remnants at hazardous or special waste collection points.

Marking: All MOTIP DUPLI products comply with the current state of the labeling regulations. The classification, classification, award is in accordance with GHS or CLP 1272/2008 / EC in its current form. The safety data sheets comply with REACH 1907/2006 / EC, Article 31 and Annex II, in the form currently in force.

Product safety

Hazard