Presto 2K filler putty styrene-free 1 Kg

Presto 2K filler putty styrene-free 1 Kg, excellent adhesion, easy to sand..

Presto Filler Putty "styrene-free" is a two-component polyester filler and filler, a mixture of a medium-elastic, highly reactive, amine-accelerated polyester resin with various mineral, environmentally friendly fillers. Suitable for metal, wood, and concrete. For filling holes and uneven surfaces, filling over pre-treated surfaces when repairing body parts and metal surfaces, repairing and restoring wood or concrete surfaces, e.g., stair treads, inserting dowels and screws, etc. Universally applicable across the entire hobby and DIY sector. Pitting areas with a diameter of less than 12 mm can be filled with Presto Fiberglass Putty before application. Pitting areas with a diameter of more than 12 mm must be treated with the Presto Repair Box.

Technical data and description:

• Easy to apply
• Excellent adhesion to a wide variety of substrates
• Easy to sand, even after extended periods
• Suitable for stove-enamel applications
• Asbestos- and silicone-free
• Resistant to weak acids, weak alkalis, propellants, solvents, water, and de-icing salts.
• Manufacturer number: 443572.
• Manufacturer: Presto.
• Delivery quantity: 1 Kg.
• Package included: 1 piece á 1 Kg as shown on the product picture.

Physical and Chemical Data:

• Base: Polyester resin with mineral fillers
• Color: ochre
• Odor: characteristic
• Form: soft, thixotropic, pasty
• Pot life/processing time at 20°C: approx. 7–8 minutes
• Processing temperature: from 12°C
• Drying time (at 20°C, 50% relative humidity):
• Sandable after: approx. 30–40 minutes
• Flash point:
  approx. 33°C (spackling knife); Not applicable for hardeners.
• Density at 20°C:
• Filler 1.85 g/cm³
• Hardener 1.15 g/cm³
• Hardener addition: 2-4% (optimal mix 2.5%)
• Temperature resistance of the cured material: 120°C
• Shelf life/Storage:
  18 months when properly stored (=10°C - 25°C, relative humidity of max. 60%) in the unopened original container. Protect from direct sunlight, frost, and moisture.
• Containers:
• Filler: Narrow-ring cans
• Hardener: Plastic tubes

Environment and labeling:

Environmentally friendly: European Aerosols strives to use formulations without regulated or hazardous ingredients, while maintaining the best possible performance. The caps and packaging are made of recyclable materials.

Disposal: Please only recycle completely empty containers. Take containers with residues to a hazardous waste collection point. For Germany only: To ensure a high reuse and recycling rate, the law requires the return of transport, sales, or outer packaging in accordance with Section 15, Paragraph 1 of the Packaging Act (VerpackG). However, alternative arrangements can also be made.

Labeling: All European Aerosols products comply with the latest labeling regulations. Classification, labeling, and labeling are carried out in accordance with GHS and CLP 1272/2008/EC in their currently valid form. The safety data sheets comply with REACH 1907/2006/EC, Article 31 and Annex II, in their currently valid form.

Instructions:

Always read and follow the instructions carefully before use!

application

1. The surface to be filled should be derusted, clean, dry, free of grease, and sanded.
2. We recommend using presto Epoxy Primer as a primer before and after filling (please note the drying time).
3. Take the required amount of material from the package and mix thoroughly with the appropriate amount of hardener.
4. Apply the mixed material to the desired layer thickness.
5. Clean tools immediately after use, if necessary, wash with nitrocellulose thinner.
6. Do not return mixed material to the can.
7. After approximately 30-40 minutes, the filled surface can be drilled, sanded, sawed, filed, primed, and painted.

Product safety

Hazard