Presto 2K polyester fine putty styrene-free 5 X 500 g

Presto 2K polyester fine putty styrene-free 5 X 500 g, excellent adhesion, easy to sand..

Highly elastic, two-component, styrene-free polyester fine filler for filling minor unevenness and for thinly filling previously treated surfaces. Suitable for metal, wood, concrete, or surfaces pre-filled with presto filler. Microfine fillers produce a very smooth surface. Universally applicable throughout the automotive sector, mechanical engineering, and for hobby work on many materials.

Technical data and description:

• Consists of highly reactive, unsaturated polyester resin filled with a novel, microfine pigment-filler combination.
• Produces a very smooth surface.
• Easy to apply.
• Easy to sand.
• Excellent adhesion.
• Asbestos- and silicone-free.
• Resistant to weak acids, weak alkalis, propellants, solvents, water, and de-icing salts.
• Manufacturer number: 443671.
• Manufacturer: Presto.
• Delivery quantity: 2500 g.
• Package included: 5 piece á 500 g as shown on the product picture.

Physical and Chemical Data:

• Base: Polyester resin with a pigment-filler combination
• Color: white
• Odor: characteristic
• Form: pasty, soft, thixotropic
• Pot life/processing time at 20°C: approx. 7-8 minutes
• Processing temperature: from 12°C
• Drying time (at 20°C, 50% relative humidity): Sandable after: approx. 30-40 minutes
• Flash point:
  approx. 33°C (spackling knife); Not applicable for hardener.
• Density at 20°C:
• Filler 1.7 g/cm³
• Hardener 1.15 g/cm³
• Hardener addition: 2-4% (optimal mix 2.5%)
• Temperature resistance of the cured material: 120°C
• Shelf life/Storage:
• 18 months when properly stored (=10-25°C, relative humidity of max. 60%) in the unopened original container. Protect from direct sunlight, frost, and moisture.
  Container:
• Filler: Narrow-ring cans
• Hardener: Plastic tubes

Environment and labeling:

Environmentally friendly: European Aerosols strives to use formulations without regulated or hazardous ingredients, while maintaining the best possible performance. The caps and packaging are made of recyclable materials.

Disposal: Please only recycle completely empty containers. Take containers with residues to a hazardous waste collection point.

For Germany only: To ensure a high reuse and recycling rate, the law requires the return of transport, sales, or outer packaging in accordance with Section 15, Paragraph 1 of the Packaging Act (VerpackG). However, alternative arrangements can also be made.

Labeling: All European Aerosols products comply with the latest labeling regulations. Classification, labeling, and labeling are carried out in accordance with GHS and CLP 1272/2008/EC in their currently valid form. The safety data sheets comply with REACH 1907/2006/EC, Article 31 and Annex II, in their currently valid form

Instructions:

Always read and follow the instructions carefully before use!

application

1. The surface to be filled should be derusted, clean, dry, free of grease, and sanded.
2. We recommend using presto epoxy primer as a primer before and after filling (please note the drying time).
3. Take the required amount of material from the package and mix thoroughly with the appropriate amount of hardener.
4. Apply the mixed material to the desired layer thickness.
5. Clean tools immediately after use, if necessary, wash with nitro thinner.
6. Do not return mixed material to the can.
7. After approximately 30-40 minutes, the filled surface can be drilled, sanded, sawed, filed, and painted.
8. presto fine filler is very elastic and can be sanded very easily without losing its consistency.
9. The filler can also be applied to substrates with lower temperatures (minimum temperature 5°C). The filler should be at room temperature.
10. Note: Do not apply directly to galvanized surfaces, these must first be treated with a suitable zinc primer.

Product safety

Hazard