Rust converter stop primer rust protection bodywork protection PETEC 250 ml

Excellent for the restoration of vehicles: Rust converter stop primer rust protection bodywork protection PETEC 250 ml. Rust converter and primer in one operation.

Water-based rust converter brush can penetrates existing rust, stops rust development, seals the surface for the long term and can be painted over afterwards.

Technical data and description:

• Primer & Primer.
• Prevents further rusting.
• Environmentally friendly, non-toxic.
• silicone-free.
• very good adhesion, priming is not necessary.
• compatible with many materials.
• Can also be used on damp substrates.
• Washing off not necessary.
• Can be filled over with polyester and epoxy filler.
• Manufacturer's No.: 70042.
• Manufacturer: PETEC.
• Delivery quantity: 250 ml.
• Delivery content: 1 piece á 250 ml is delivered as shown in the product picture.

Application

1. Working temperature: +5°C to +35°C.
2. Shake can well before use.
3. Remove coarse deposits with a wire brush and thoroughly clean and degrease the surface.
4. Apply PETEC Rust Converter to the corroded area and allow to react.
5. After a reaction/curing time of 3 hours, fill and paint over the area with commercially available systems.
6. To ensure the suitability of the product for the desired application, self-tests are recommended in any case.
7. In case of contact with painted surfaces, remove the rust converter immediately with water.
8. Close can after use.