For the perfect long-term protection: Presto Multi Wax 432132 1 liter. The products from the traditional German manufacturer Presto are premium products, made in Germany.
The presto products form the perfect repair system and offer the customer a highly competent range. But not only on the vehicle, also around the house and garden are countless applications for repair, maintenance and conservation of value.
Prestolith® Multi Wax 432132. The product has an excellent moisture displacing and penetrating effect. Leaves a firmly adhering, light-colored protective film after drying. Adheres to bare and painted surfaces. Excellent as a long-term protection for immobilized vehicles or also for garden tools.
Technical data and description:
- Aromatics-free quality.
- Self-healing properties.
- Excellent water displacing effect.
- Easy application.
- No dripping or running off.
- Leaves transparent, slightly tacky, wax layer.
- When heated, no typical odor of conventional waxes.
- Manufacturer's No.: 432132.
- Manufacturer: Presto.
- Delivery quantity: 1 liter.
- Delivery content: 1 piece á 1 liter is supplied as shown in the product image.
Directions for use:
Always carefully read and observe the caution texts before use!
Application
- For optimal processing, bring the product to room temperature.
- Shake well before use.
- The substrate must be clean, dry and free of grease.
- Application by means of a suction pipe gun at a pressure of 3 to 6 bar.
- The gun can be cleaned with solvent when fresh.
Physical and Chemical Data:
- Base: solvent, wax, additives.
- Color: white-transparent.
- Consistency: liquid.
- Viscosity (20°C) DIN 53211 4mm: 30 seconds.
- Density (20°C) according to DIN 51757: approx. 0.85 kg/ltr.
- Solids content according to DIN 53216 (3 hours at 120°C): approx. 47 %.
- Drying (at 20°C, 65% relative humidity):
- Dust dry: after approx. 105 minutes (±100 µ).
- Fully dried: after approx. 5 hours (±100 µ).
- Drying time depends on ambient temperature, humidity and applied film thickness.
- Chemical resistance to: Water, salt spray, oil, light acid and base.
- Temperature resistance (after setting): -25°C to +160°C.
- Consumption at a layer thickness ±200µ wet: ±0.2 kg/m².
- Salt spray test (DIN 50021): up to 1000 hours Ri 0 at 100µ dry film.
- Bending test (DIN 53152 -30°C / +70°C): no cracking, no delamination.
- Shelf life/storage:
- 5 years with proper storage (=10°-30°C, relative humidity of max. 60%).
- Container/Contents:
- Funnel bottle for the suction air gun, maximum nominal volume 1000 ml.
Environment and labeling:
Environmentally friendly: MOTIP DUPLI aims to use formulations without regulated or questionable ingredients, with the best possible performance. Caps and packaging are made of recyclable materials.
Disposal: Please recycle only containers that are completely empty. Take containers with residues to a problem waste site.
Labeling: All MOTIP DUPLI products comply with the latest labeling regulations. The classification, categorization, labeling is done according to GHS or CLP 1272/2008/EC in the current valid form. The safety data sheets comply with REACH 1907/2006/EC, Article 31 and Annex II, in the currently valid form.
Product safety
Hazard
- Causes skin irritation
- Causes serious eye irritation
- May cause an allergic skin reaction
Classification: | Spatula filler |
Shipping weight: | 0,90 Kg |
Product weight: | 0,80 Kg |
Contents: | 1,00 l |
No models for vehicle type car.