Rim wheel paint spray Car's Dupli Color 385902 Gold 3 X 400 ml with pistolgrip

Makes your rims shine again !!!, here the product. Dupli Color rim paint gold 385902 3 X 400 ml with pistolgrip, high-quality, quick-drying nitro combi paint. The products from the traditional German manufacturer Dupli Color are premium products, made in Germany.

• High-quality, quick-drying nitro combi paint.
• Good flow, smooth surface.
• Weather-resistant, lightfast and non-yellowing.
• Conditionally petrol-proof.
• Good color and gloss retention.
• High surface hardness, abrasion-resistant.
• Manufacturer no .: 385902 + P063.
• Manufacturer: Dupli Color.
• Country of manufacture: Germany.
• Delivery quantity: 1,2 liters.
• Delivery content: 3 pieces á 400 ml is delivered as shown on the product picture.

Instructions for use:

Many Dupli Color spray paints prevent unauthorized use of the spray protection and tamper-proof sealing cap. Please see the corresponding advises on the cap or label.
Always read and observe the warning texts carefully before use!

Substrate preparation:

1. Thoroughly clean rims of dirt, grease and brake dust.
2. Remove any pore rust that may be present.
3. The surface must always be sanded, clean, dry and free of grease.
4. Mask the tire flanks with masking tape.
5. Protect the surrounding area against spray mist with paper.
6. Pre-coat with presto primer.
7. After drying through, briefly sand over (sandpaper P600).

Paint:

1. Shake can for 3 minutes before use.
2. Test spray.
3. Spray on several thin layers from a distance of approx. 25 cm at intervals of 3 - 5 minutes.
4. To protect the metal pigments, seal the metallic paint with Dupli Color clear varnish.
5. Do not spray on surfaces painted with synthetic resin!

Physical and chemical data:

• Binder base: Nitro-Kombi.
• Shades: gold, silver.
• Odor: like solvent.
• Degree of gloss: at a 60 ° measuring angle according to DIN 67530.
• satin gloss: 40-50 GE; 80-90 GE after painting over with presto clear varnish glossy.
• Fertility:
• Depending on the nature and color of the surface, 500 ml is sufficient for 4-5 rims.
• Drying (at 20 ° C, 50% relative humidity):
• Dust dry: after 10 minutes.
• Touch proof: after 60 minutes.
• Thoroughly dry: after 24 hours.
• Can be painted over with clear lacquer: after 60 minutes.
• The drying time depends on the ambient temperature, the humidity and the applied layer thickness.
• Temperature resistance: up to 80 ° C.
• Shelf life / storage:
• 10 years if appropriate storage provided (= 10 ° -25 ° C, relative air humidity of max. 60%).
• Container / content:
• Aerosol cans with a nominal volume of 400 ml.

Environment and labeling:

Environmentally friendly: MOTIP DUPLI strives to use recipes without regulated or questionable ingredients, with the best possible performance. The tops and packing are made out of recycled material.

Disposal: Please only recycle completely empty containers. Dispose of drums and remnants at hazardous or special waste collection points.

Labeling: All MOTIP DUPLI products comply with the current status of labeling regulations. The classification, classification, labeling is carried out according to GHS or CLP 1272/2008 / EG in the currently valid form. The safety data sheets correspond to REACH 1907/2006 / EG, Article 31 and Annex II, in the currently valid form.

Product safety

Hazard