Presto 2K fiberglass spatula 500 g gray-green

Presto 2K fiberglass spatula 2 pieces á 250 g gray-green, to repair rust through

The presto products form the perfect repair system and offer the customer a highly competent range. But not only on the vehicle, also around the house and garden, there are countless applications for repair and maintenance of value.

Technical data and description:

• Easy processing.
• Easy to sand.
• Very good adhesion.
• Asbestos and silicone free.
• Short curing time.
• Manufacturer No .: 601013.
• Manufacturer: Presto.
• Delivery quantity: 500 g.
• Package included: 2 pieces á 250 g as shown on the product picture.

Physical and Chemical Data:

• Base: polyester resin with mineral fillers and glass fiber parts
• Color: gray-green
• Odor: styrene
• Form: pasty, soft, thixotropic
• Pot life / processing time at 20 ° C: approx. 4 - 5 min. (Styrene-reduced quality: approx. 5-6 min.)
• Processing temperature: from 12 ° C
• Drying (at 20 ° C, 50% relative humidity):
• Sandable after: approx. 20 - 30 minutes (styrene-reduced quality: after approx. 30 min.)
• Flash point:
• about 33 ° C (spatula); not applicable for hardener
• Density at 20 ° C:
• Putty 1.46 g / cm³
• Hardener 1.15 g / cm³
• Hardener addition: 2 - 4% (optimal mixture 2.5%)
• Temperature resistance of the cured material: 120 ° C
• Shelf life / storage:
• 24 months (styrene-reduced quality: 18 months) with proper storage (= 10 ° -25 ° C, relative humidity of max 60%) in a closed original container. Protect from direct sunlight, frost and moisture.
• containers:
• Fillers: Narrow ring boxes
• Hardener: plastic tubes

Environment and labeling:

Environmentally sound: The products of MOTIP DUPLI are free of harmful metals. The corporate group strives to use formulations without regulated or questionable ingredients without influencing the best possible performance. The tops and packing are made out of recycled material.

Disposal: Please only recycle completely emptied containers for recycling. Dispose of drums and remnants at hazardous or special waste collection points.
Marking: All MOTIP DUPLI products comply with the current state of the labeling regulations. The classification, classification, award is in accordance with GHS or CLP 1272/2008 / EC in its current form. The safety data sheets comply with REACH 1907/2006 / EC, Article 31 and Annex II, in the form currently in force.
Instructions:

Always read and follow the instructions carefully before use!

application

1. The surface to be covered should be rusted, clean, dry, free of grease and sanded.
2. Remove the required amount of material from the pack and mix well with the appropriate amount of hardener.
3. Apply the mixed material in the desired layer thickness.
4. Clean tools immediately after use, if necessary, wash with nitro dilution.
5. Do not return mixed material to the can.
6. After about 20-30 minutes, the trowelled surface can be drilled, sanded, sawed, filed and painted.

Product safety

Hazard