Windshield bonding made easy: Windshieldadhesive Windshield adhesive cartridge PETEC 310 ml.
One-component, high-modulus polyurethane adhesive and sealant for mounting front, rear and side windows with fast adhesion build-up and short drive-away time.
Directions for use:
If necessary, lightly roughen the bonding surface with an abrasive fleece. Clean and degrease adhesive surfaces with PETEC Cleaning Cloth (Art. No. 82111).
Then apply PETEC Multiaktiv Primer Kombistick (Art. No. 82410) evenly in one direction to the adhesive surface of the pane. Open the pane adhesive cartridge, apply the nozzle and discard the first 2 cm of adhesive. Using a vertically guided PETEC Multi battery squeeze gun (Art. No. 81100), apply the windshield adhesive evenly in one direction in the form of a triangular bead to the glass pane or body flange. Please follow the vehicle manufacturer's instructions for bead geometry and correct installation. The beginning and end of the bead must overlap and be spread cleanly. With a processing time of 20 minutes, the pane must be glued in place within this time.
Technical data and description:
- For all types of vehicles.
- fast curing.
- high modulus.
- suitable for antennas.
- low conductivity.
- good adhesion to residual material.
- fast readiness for driving.
- Basis 1-component polyurethane.
- Curing time approx. 3.5 mm/24 hours.
- Curing humidity.
- Ready to use 2 hours.
- Processing time 20 minutes.
- Manufacturer No.: 83310.
- Manufacturer: PETEC.
- Delivery quantity: 310 ml.
- Delivery content: 1 piece á 310 ml is supplied as shown in the product image.
All information is published to the best of our knowledge. However, we reserve the right to make changes.
Product safety
Hazard
- May cause allergy or asthma symptoms or breathing difficulties if inhaled
- Causes serious eye irritation
- Causes skin irritation
Classification: | Lubricants |
Shipping weight: | 0,49 Kg |
Product weight: | 0,39 Kg |
Contents: | 310,00 ml |
No models for vehicle type car.