Presto 2K polyester fine spatula 250 g

Presto 2K polyester fine spatula 250 g, gives a very smooth surface.

The presto products form the perfect repair system and offer the customer a highly competent range. But not only on the vehicle, also around the house and garden, there are countless applications for repair and maintenance of value.

Technical data and description:

• Made of highly reactive, unsaturated polyester resin, filled with a novel, micro-fine pigment-filler combination.
• Makes a very smooth surface.
• Easy processing.
• Easy to sand.
• Very good adhesion.
• Asbestos and silicone free.
• Short curing time, therefore fast further work possible.
• Resistant to weak acids, weak alkalis; Propellants, solvents, water and salts.
• Manufacturer number: 601211.
• Manufacturer: Presto.
• Delivery quantity: 250 g.
• Package included: 1 piece 250g as shown on the product picture.

Physical and Chemical Data:

• Base: polyester resin with a pigment-filler combination
• Color white
• Odor: styrene
• Form: pasty, soft, thixotropic
• Pot life / processing time
• at 20 ° C: approx. 4 - 5 min. (styrene-reduced quality: approx. 5-6 min.) Processing temperature: from 12 ° C
• Drying (at 20 ° C, 50%
• relative humidity): Sandable after: approx. 20 - 30 minutes (styrene-reduced quality: after approx. 30 min.)
• Flash point: approx. 33 ° C (spatula); not applicable for hardener
• Density at 20 ° C: filler 1.7 g / cm³ hardener 1.15 g / cm³
• Hardener addition: 2 - 4% (optimal mixture 2.5%)
• Temperature resistance of the
• hardened material: 120 ° C
• Shelf life / storage: 24 months (styrene-reduced quality: 18 months) with proper storage (= 10 ° -25 ° C, relative humidity of max 60%) in a closed original container. Protect from direct sunlight, frost and moisture.
• Container: Spachtelmassen: Schmalringdosen
• Hardener: plastic tubes
• Environment and labeling

Environment and labeling:

Environmentally sound: The products of MOTIP DUPLI are free of harmful metals. The corporate group strives to use formulations without regulated or questionable ingredients without influencing the best possible performance. The tops and packing are made out of recycled material.

Disposal: Please only recycle completely emptied containers for recycling. Dispose of drums and remnants at hazardous or special waste collection points.
Marking: All MOTIP DUPLI products comply with the current state of the labeling regulations. The classification, classification, award is in accordance with GHS or CLP 1272/2008 / EC in its current form. The safety data sheets comply with REACH 1907/2006 / EC, Article 31 and Annex II, in the form currently in force.

Instructions:

Always read and follow the instructions carefully before use!

application

1. The surface to be covered should be rusted, clean, dry, free of grease and sanded.
2. Remove the required amount of material from the pack and mix well with the appropriate amount of hardener.
3. Apply the mixed material in the desired layer thickness and sand if necessary with 400 wet sandpaper.
4. Clean tools immediately after use, if necessary, wash with nitro dilution.
5. Do not return mixed material to the can.
6. After about 30 minutes, the filled area can be drilled, sanded, sawed, filed and painted.
7. After one-time sanding with 400 wet sandpaper a painting is already possible. presto flex fine putty is very elastic and consistently easy to sand.
8. The putty can also be applied to substrates with lower temperatures (minimum temperature 5 ° C). The filler should be at room temperature.
9. Note: Do not apply directly to galvanized surfaces, these must first be provided with a suitable zinc primer.

Product safety

Hazard