For bridging larger holes and damaged areas: Presto Repair Box 600412 250 g. The products from the traditional German manufacturer Presto are premium products, made in Germany.
The presto products form the perfect repair system and offer the customer a highly competent range. But not only on the vehicle, also around the house and garden are countless applications for repair, maintenance and conservation of value.
Prestolith® HaftReparatur Box 600412. presto Reparaturbox is a repair pack containing unsaturated, elasticized polyester resin, hardener as well as glass fiber fleece and glass fiber fabric. For bridging larger holes, rust-through and damaged areas in metal, wood, concrete, etc. Very well usable in mold and model making, in the garden (spray ponds) and in other industrial areas. Applicable e.g. for leaking pipes and tubes, boilers, boats, etc.
Technical data and description:
- Easy processing.
- High elasticity.
- Good adhesion.
- Easy to sand, even after a long time.
- Resistant to weak acids, weak alkalis; blowing agents, solvents, water and de-icing salts.
- Manufacturer's No.: 600412.
- Manufacturer: Presto.
- Delivery quantity: 250 g.
- Delivery content: 1 piece á 250 g is supplied as shown in the product picture.
Directions for use:
Always carefully read and observe the caution texts before use!
Application
- The damaged area should be derusted, clean, dry, free of grease and sanded.
- Cut the enclosed glass fiber fabric to size according to the size of the damaged area so that there is still sufficient overlapping edge.
- Take the required quantity of material from the package, mix well with the appropriate quantity of hardener and apply in one operation as follows:
- Coat the pre-treated surface with resin and apply the cut glass fiber material.
- Press down evenly with a brush, starting at the edge, and soak again with polyester resin. Glass fiber must not have any air pockets.
- As the last layer, glass fiber fleece should be applied and dabbed over, as a suitable surface for subsequent buildups. It is possible to build up the surface in several layers.
- If the surface is to be painted, further treatment with presto Füllspachtel or presto Feinspachtel is recommended. The sticky surface of polyester resin functions as an optimum adhesion promoter. However, this can also be washed off with nitro thinner if desired.
- Clean tools immediately after use, wash off with Nitro Thinner if necessary.
- Do not return mixed material to the can.
- After approx. 40 minutes, the repaired surface can be drilled, sanded, sawed, filed and painted.
Physical and Chemical Data:
- Base: unsaturated, elasticized polyester resin.
- Color: honey-colored.
- Odor: of styrene.
- Form: viscous consistency.
- Pot life/processing time at 20°C: approx. 10 min.
- Working temperature: from 12°C.
- Drying (at 20°C, 50% relative humidity):
- Sandable after: approx. 40 min.
- Flash point:
- approx. 33°C (resin); not applicable for hardener.
- Density at 20°C:
- Resin 1.2 g/cm³.
- Hardener 1.15 g/cm³.
- Addition of hardener: 2 - 4 % (optimum mixture 2.5 %).
- Temperature resistance of cured material: 120°C.
- Shelf life/storage:
- 18 months when stored properly (=10°-25°C, relative humidity of max. 60%) in closed original container. Protect from direct sunlight, frost and moisture.
- Packaging/Contents:
- Polyester resin: narrow ring tins 250 g or 1000 g.
- Hardener: Plastic tubes.
- Fiberglass fabric + fleece:
- 250 g package: 60 cm long x 15 cm wide.
Environment and labeling:
Environmentally friendly: MOTIP DUPLI aims to use formulations without regulated or questionable ingredients, with the best possible performance. Caps and packaging are made of recyclable materials.
Disposal: Please recycle only containers that are completely empty. Take containers with residues to a problem waste site.
Labeling: All MOTIP DUPLI products comply with the latest labeling regulations. The classification, categorization, labeling is done according to GHS or CLP 1272/2008/EC in the current valid form. The safety data sheets comply with REACH 1907/2006/EC, Article 31 and Annex II, in the currently valid form.
Product safety
![f](templates/FlatChild/themes/base/images/ghspict/f.gif)
![h](templates/FlatChild/themes/base/images/ghspict/h.gif)
![x](templates/FlatChild/themes/base/images/ghspict/x.gif)
Hazard
- Flammable liquid and vapour
- Causes skin irritation
- Causes serious eye irritation
- Suspected of damaging fertility or the unborn child
Classification: | Spatula filler |
Shipping weight: | 0,40 Kg |
Product weight: | 0,30 Kg |
Contents: | 250,00 g |
No models for vehicle type car.