Adhesion Primer Rustprotection Cars Dupli Color 740220 Red 3 X 400 ml with Pistolgrip

The optimal primer. Here is the product: Dupli Color Car's Haftgrund primer rust protection 740220 Red 3 X 400 ml with Pistolgrip, High-quality, nitro combi quality. The products from the German traditional manufacturer Dupli Color are premium products, made in Germany.

Dupli Color Cars Adhesion Primer Rust Protection 740220 Red, the ideal primer as a filler. Dupli Color products form the perfect repair system and offer customers a highly competent range. Dupli Color as a traditional German manufacturer is the perfect partner for the repair or restoration of your vehicle parts.With the DUPLI-COLOR brand, MOTIP DUPLI has been the pioneer in the field of spray paints and touch-up pens on the European market for over 50 years. Under this brand, the company offers a wide range of products for car, home and hobby, but also for industrial use.Here you will find everything you need for a quick yet durable paint repair: for substrate pretreatment, paint touch-up in the original color tone of your vehicle, for laminating work, but also for the final styling of your vehicle with a variety of products for optical tuning. Made in Germany.

Technical data and description:

• High-quality nitro combination quality.
• Particularly high filling power.
• Good flow, smooth surface.
• Fast drying.
• Protects against rust.
• Provides best adhesion of the topcoat to the substrate.
• Optimizes the gloss of the top coat.
• Ensures economical use of the topcoat.
• Particularly consumer-friendly due to durable, application-friendly quality that can be easily sanded and painted over.
• For interior and exterior applications.
• Unauthorized use not possible due to unbreakable cap.
• Manufacturer's No.: 740220 + P063.
• Manufacturer: Dupli Color.
• Country of manufacture: Germany.
• Delivery quantity: 1,2 liters.
• Delivery content: 3 pieces á 400 ml with Pistolgrip is supplied as shown in the product image.

Instructions for use:

Many Dupli Color spray paints prevent unauthorized use of the spray protection and tamper-proof sealing cap. Please see the corresponding advises on the cap or label.
Always read and observe the warning texts carefully before use!

Application:

Surface preparation:

1. Derust, sand and clean the surface to be painted.
2. If necessary, fill.
3. The substrate must be clean, dry and free of rust and grease.

Priming:

1. Shake can for 2 minutes.
2. Test spray in an inconspicuous area if necessary.
3. Level small depressions and porous filler areas by spraying several thin coats and sanding.
4. Spray distance approx. 25 cm.
5. After drying (approx. 2-4 hours), wet sand with 600 grit sandpaper, clean and allow to dry.
6. Then apply top coat.
7. Can be painted over with synthetic resin or acrylic paints; do not spray on synthetic resin paints!

Physical and chemical data:

• Binder base: nitro-combi.
• Color: gray, red, white.
• Gloss level: matt.
• 5-10 GE at 60° measuring angle according to DIN 67530.
• Yield:
• Depending on the condition and color of the substrate, suffice.
• 400 ml for approx. 0.8 m² for a covering coat.
• 600 ml for approx. 1.2 m² for a covering coat.
• Drying (at 20°C, 50% relative humidity):
• Dust dry: after approx. 15 minutes.
• Touch resistant: after 30 minutes.
• Sandable: after approx. 2-4 hours.
• Temperature resistance: up to 80°C.
• Shelf life:
• 10 years if stored properly (=10°-25°C, relative humidity of max. 60%).
• Packaging: Aerosol cans with 150 ml or 400 ml nominal volume.

Environment and labeling:

Environmentally friendly: MOTIP DUPLI strives to use recipes without regulated or questionable ingredients, with the best possible performance. The tops and packing are made out of recycled material.

Disposal: Please only recycle completely empty containers. Dispose of drums and remnants at hazardous or special waste collection points.

Labeling: All MOTIP DUPLI products comply with the current status of labeling regulations. The classification, classification, labeling is carried out according to GHS or CLP 1272/2008 / EG in the currently valid form. The safety data sheets correspond to REACH 1907/2006 / EG, Article 31 and Annex II, in the currently valid form.

Product safety

Hazard