Mirror fixed mirror adhesive set PETEC 6 Pieces

Your rear view mirror needs to be fixed? With the mirror fixed adhesive set 6 pieces from PETEC this is done in no time.

The special adhesive set for bonding the rearview mirror to the windshield. The Klebe- Set can also be used to attach antennas, locks, etc. to windows.

Instructions for use:
Application temperature +5°C to +35°C. Mark the position of the mirror on the outside of the windshield.
windshield. If there is a removable metal mirror base, remove it from the rear-view mirror before bonding,
otherwise glue it in place completely. Remove adhesive residue if necessary. Roughen the gluing area with the supplied abrasive fleece and clean and degrease thoroughly. Then cut the special mesh to the size of the mirror base. Open mirror base, spread adhesive evenly on mirror base and place the cut special mesh fabric on the mirror base wetted with adhesive. Now immediately press the mirror foot lightly against the previously marked spot on the windshield. Press the mirror foot evenly against the windshield for approx. 2 minutes. Then remove excess adhesive and do not apply any load for a further 15 minutes, if necessary fix with armor tape. Final strength is achieved after 24 hours. Also suitable for bonding toggles on hinged windows and metal handles on glass. Not suitable for plastic bonding surfaces, only for glass-metal!

Technical data and description:

• easy application.
• no mixing required.
• with mesh for 2 bondings.
• transparent bonding.
• fast adhesion.
• high strength.
• Color: amber.
• Shelf life: 24 months.
• Manufacturer No.: 93800.
• Manufacturer: PETEC.
• Delivery quantity: 6 g adhesive + 12x mesh.
• Delivery content: 6 sets is delivered as shown in the product picture.

All information is published to the best of our knowledge. However, we reserve the right to make changes.

Product safety

Hazard