Rimspray silver Rimsilver lacquerspray Presto 428924 4 X 500 ml

Also makes your rims really shine again: Presto Rim Spray 428924 4 X 500 ml, High-quality, fast-drying nitro combination paint. The products from the German traditional manufacturer Presto are premium products, made in Germany.

The presto products form the perfect repair system and offer the customer a highly competent range. But not only on the vehicle, also around the house and garden are countless applications for repair, maintenance and conservation of value.
Prestolith® Rim Spray 428924. Lets rims shine in decorative brilliance. Durable, highly pigmented protective coating for steel and light alloy rims.

Technical data and description:

• High-quality, fast-drying nitro combination lacquer.
• Good flow, smooth surface.
• Weather resistant, lightfast and non-yellowing.
• Conditionally resistant to gasoline.
• Good color and gloss retention.
• High surface hardness, abrasion resistant.
• Manufacturer- No.: 428924.
• Manufacturer: Presto.
• Delivery quantity: 2000 ml.
• Delivery content: 4 piece á 500 ml is supplied as shown in the product picture.

Directions for use:

With many presto spray paints, spray protection and break-proof cap prevent unauthorized use. Observe the corresponding instructions on the cap or label.
Always read and observe the caution texts carefully before use!

Application

1. Thoroughly clean rims from dirt, grease and brake dust.
2. Remove any pore rust that may be present.
3. The surface must always be sanded, clean, dry and free of grease.
4. Mask tire sidewalls with masking tape.
5. Protect the surrounding area with paper against spray mist.
6. Precoat with presto primer.
7. After drying, sand over briefly (P600 sandpaper).

Paint:

1. Shake can for 3 minutes before use.
2. Test spray.
3. Spray on several thin coats from a distance of approx. 25 cm at intervals of 3 - 5 minutes.
4. To protect the metallic pigments, seal the metallic paint with presto clear lacquer.
5. Do not spray on surfaces painted with synthetic resin!

Physical and Chemical Data:

• Binder base: nitro-combi.
• Color shades: gold, silver.
• Odor: of solvent.
• Gloss level: at 60° measuring angle according to DIN 67530.
• Silk gloss: 40-50 GE; 80-90 GE after overcoating with presto Klarlack glz.
• Yield:
• Depending on the condition and color of the substrate, 500 ml is sufficient for 4-5 rims.
• Drying (at 20°C, 50% relative humidity):
• Dust dry: after 10 minutes.
• Touch dry: after 60 minutes.
• Fully dry: after 24 hours.
• Recoatable with clear lacquer: after 60 minutes.
• Drying time depends on ambient temperature, humidity and applied film thickness.
• Temperature resistance: up to 80°C.
• Shelf life/storage:
• 10 years with proper storage (=10°-25°C, relative humidity of max. 60%).
• Packaging/Contents:
• Aerosol cans with 500 ml nominal volume.

Environment and labeling:

Environmentally friendly: MOTIP DUPLI aims to use formulations without regulated or questionable ingredients, with the best possible performance. Caps and packaging are made of recyclable materials.

Disposal: Please recycle only containers that are completely empty. Take containers with residues to a problem waste site.

Labeling: All MOTIP DUPLI products comply with the latest labeling regulations. The classification, categorization, labeling is done according to GHS or CLP 1272/2008/EC in the current valid form. The safety data sheets comply with REACH 1907/2006/EC, Article 31 and Annex II, in the currently valid form.

Product safety

Hazard