Varnishsealer 1K Nano 250 ml + Green Star 1 Liters Koch Chemie

You want the paint to shine properly again? Then simply use: Varnishsealer 1K Nano 250 ml + Green Star 1 Liters Koch Chemie.

The 1K nano network is firmly bonded to the paint and, based on innovative reactive substances, forms an extremely smooth, high-gloss paint seal that is resistant to chemicals, UV radiation and abrasives. Special additives give the paint an extremely deep gloss. The onestep process significantly reduces working time compared to 2-component systems. The paint is perfectly and permanently protected from adverse environmental influences. Thanks to a unique easy to clean performance, insects, bird droppings and similar adhesions can be removed much more easily. The shelf life is approx. 1 year, but can be extended to up to 3 years by regular manual follow-up care with NanoMagicShampoo (hand wash) or follow-up care with NanoMagic Twin Wax (washing system) as well as the recommended annual paint inspection by a specialist! Degree of grinding: 0 Degree of gloss: 9.9.

The highly concentrated, phosphate and solvent free, alkaline universal cleaner. Due to its enormous dirt and oil carrying capacity, it can be used universally for the areas of workshop floor and industrial cleaning, interior and exterior cleaning of cars and trucks, and engine washing. Special corrosion inhibitors ensure high material compatibility with sensitive components such as anodized aluminum. For use in spray extraction and other carpet cleaning devices, we recommend adding the foam brake Kocentschäumer. Also ideally suited for biological process water treatment plants. Quick-separating and tested according to ÖNORM 5105 (test concentration 10% solution).

Application recommendation
A. Basic cleaning
Thoroughly alkaline the vehicles before the polishing and sealing process (e.g. with Green Star, none
Sealing shampoos) pre-clean / wash. For coarse soiling such as tree sap, rust film, tar
Pretreat etc. with cleaning clay, tar cloth or similar.
B. Paint preparation
1. Heavily to moderately weathered paints:
Depending on the condition, machine the paintwork with Heavy Cut H9.01 or Fine Cut F6.01 (see
Product information Heavy Cut H9.01 and Fine Cut F6.01). Residues completely with a professional microfibre cloth *
remove.
2. Lightly weathered paints as well as paints treated according to point 1 (hologram removal):
Micro Cut M3.02 mechanically using an eccentric with forced rotation (e.g. Makita BO6040) and
Use the anti-hologram sponge purple (see product information Micro Cut M3.02). Completely remove residues with a professional microfibre cloth *.
3. New (hologram-free and scratch-free) and paints treated according to point 2:
Use suitable gloves from here on. All surfaces with a clean, silicone &
Wipe off a professional microfibre cloth * soaked in wax remover with little pressure and immediately before drying
Wipe with another new professional microfibre cloth * with the other hand. This is the only way to create surfactants
Drying aids, the oils contained in polishes, etc. completely removed and crosslinking problems of the
1K nano avoided. Caution: For sensitive solid or single-layer paints, silicone and wax remover should be used
Diluted 1: 4 with water to avoid possible matting. Last streaks with one
Polish another clean professional microfibre cloth * without applying pressure. The paint should now be under sunlight
or a paint control sodium vapor lamp have a scratch-free and hologram-free surface. To
During this step, the paint must no longer be used with the palms / fingers (risk of crosslinking disorders,
Use gloves). The surface is now perfect for the nano-sealing
prepared.
C. Paint sealing
1. Observe the recommended ambient temperature of 15-30 ° C when processing the 1K-Nano. Absolutely
Process and harden in a closed hall, not outdoors.
2. Shake the aluminum bottle well shortly before use and place in the plastic bottle supplied (75ml)
transfer. This amount is usually enough for a medium-sized vehicle. If the order quantity is too low
the sealing quality suffers. Sealing only on fully cured (please note the information below)
painted surfaces.
2. 1K-Nano ideally by machine (especially with single-layer and dark solid colors, the
mechanical application strongly recommended) using an eccentric without forced rotation at slow speed and
Finish sponge black, alternatively manually using a soft sponge (999038) without pressure in sections
(max. 1 component: hood, door, fender, etc.). Approx. Polish in for 2-3 minutes and repeatedly
apply fresh sealant. During the polishing process, draw closely overlapping paths several times to create a
to ensure area-wide networking and cloud formation (uneven color deepening)
avoid. After these 2-3 minutes do not apply any fresh sealant and polish until
a coherent film without the formation of drops is created.
3. Wait another 2-3 minutes and then manually rub the completely dry film with a clean one
Polish off professional microfibre cloth * to a high gloss.
4. After a reaction time of approx. 1-2 hours, the seal is hardened, making it chemically resistant
and an abrasion-resistant long-term seal is created. Any streaks that may appear (excess product)
arise from the reaction process and can be removed after the curing time using a professional microfiber cloth *
removed or eliminated with the first vehicle wash (after 3 days at the earliest).

Hints
Attention: Do not use on fresh refinish paints! Repainted surfaces need a
Hardening time of approx. 6-8 weeks before the sealant can be applied. Original manufacturer paints
for new vehicles can be sealed directly. During processing for good ventilation and
Provide fresh air. Due to the reactive components, 1K-Nano comes in a high-density aluminum bottle
kept. Refill any remaining quantities into the aluminum bottle immediately after use
close and always store upright. The shelf life is approx. 1 year after opening.

* Only use the ultrasonically cut professional microfiber cloth to process the 1K-Nano

Technical data and description:

• 1K Nano:
• Cured paints on cars, commercial vehicles, motorcycles, etc.
• Shake before use.
• Check for suitability and compatibility before use.
• Green Star:
• Interior, exterior and car wash application.
• Manufacturer- No.: 245001 + 25001.
• Manufacturer: Koch Chemie.
• Delivery quantity: 250 ml sealant in aluminum bottle, 75 ml dosing bottle, sponge, 1 liter Green Star. 
• Delivery content: 1 set is supplied as shown in the product image.

All information has been published to the best of our knowledge. However, we reserve the right to make changes.

Product safety

Hazard